Aluminium
Mirach supplies color coating aluminium coil; aluminium circle/disc; Alloy 1050 H18 for lithographic quality coil/foil, 3003, 5052 5 bar tread plate; fin stock and quench alloy 2017, 7075.
Aluminium Coating Coil (PE&PVDF)
Aluminium coating coil PE and PVDF for roof, ceiling, ACP usage
Alloy: 1100, 1050, 3003, 3104, 3105, 5005 etc
Thickness: 0.02~6.0mm Width: maximum 2500mm
Coating: PE, PVDF accordingly to RAL code
Coating thickness: PE ≥ 18mic; PVDF ≥ 25mic; premier ≥ 5mic
Gloss: 10~90% (EN ISO-2813: 1994)
Aluminium Lithographic Quality Coil/Foil (PS Plate 1050 H18)
Aluminium Lithographic Coil Typical Alloy Temper: Aluminium Coil 1050 H18
Thickness(mm)0.145-0.50; Width(mm)500-1600;
Standard available YS/T421-2007
Surface Roughness: 0.18-0.28 μm
Anodizing properties: No defect of black/white strip
Aluminium Circle/Disc
Detail: Aluminium Circle / wafer for civil pan / pot / kettle cookware etc.
Alloy: 1100, 1200, 1050, 1060, 1070, 3003 etc.
Thickness(mm): 0.1-6.0;
Diameter(mm): 50-1500
Temper: Annealed, Soft, O, elongation: 35% minimum
Aluminium Tread Sheet
Aluminium Tread Plate/Sheet, several pattern available, like 5 bars both 90 degree or 135 degree, 3 bars, 2 bars, 1 bar, and diamond or compass patters.
Normal Adopted alloy: 1100, 3003, 5052 etc
Thickness: Base metal from 1.0~4.5mm
Bar height control within 0.8~1.2mm, and package with paper interleaved to protect the surface
Aluminium Extruded Bar (2011, 2017, 6061, 6082, 7075 etc round/square/rectangle/hexagon)
Aluminium Extruded Bar (round/square/rectangle/flat/hexagon)
Typical Alloy: 1060, 1100, 2014, 2017, 2024, 3003, 5083, 5154, 5454, 6061, 6063, 6082, 7075 etc
Temper: O, F, H112, T3, T4, T6, T351, T651, etc
Diameter (mm): 5-300mm Length: 1000~3000mm.
Standard available: ASTM B221&GB/T3191-1998 ANSI H35.1M.
Aluminium Air Conditioner Foil
Air Conditoner Foil: Alloy: 1100, 1235, 8011, 3102, 8006etc
Thickness: 0.095~0.2mm
Aluminium Air Conditoner Foil (fin stock) is wildly used as a radiator in household colding equipment and vehicle air conditioner etc.
Thickness: +/-0.005mm Inner Diameter: +1.0/-0.5mm
Hydrophilic Properties:
Aluminium Lithographic Foil (1050 H18 for offset printing)
Lithographic Aluminium Foil, sheet, coil,usually adopt aluminium alloy 1050 temper H18 as material, the most important requirements for lithographic coil/foil are surface quality, flatness, and graining response. To achieve these properties, a wide range of sophisticated equipment is utilized, and the manufacturing teams work hand in hand with research and development experts.
Alloy: 1050, 1052, 1060, 1070; Temper: H16, H18;
Aluminium Embossed/Stucco Plate
Aluminium Embossed Plate, Aluminium Stucco Plate, Aluminium Corrugated Sheet
Aluminium embossed plate / sheet Alloy: 1000, 3000, and 5000 series;
Temper: H14, H24, H22
Thickness(mm): Bottom thick 0.20-1.50;
Width(mm): 500-1500;
Aluminium Chequer Plate
Aluminium Chequer Plate / Sheet, several pattern available, like 5 bars chequered, 3 bars, 2 bars, 1 bar, and diamond or compass patters.
Normal Adopted alloy: 1100, 3003, 5052 etc
Thickness: Base metal from 1.0~4.5mm
Bar height control within 0.8~1.2mm, and package with paper interleaved to protect the surface
Aluminium Sheet and Strip for Offset-Plate (1050 H18)
Aluminium Offset Printing Sheet, Aluminium Offset Printing Strip
Alloy 1050, 1052, 1060, 1070;
Temper H16, H18;
Thickness(mm)0.145-0.50;
Aluminium Coil (Non heat treatment alloy 1000, 3000, 5000 Series)
Commonly used: Aluminium coil 1100, 1050, 3003, 3105, 5005, 5052 etc
Temper: Hard (H18/H28), semi-hard(H14/H24), soft and annealed (O) etc
Size: Thickness from 0.2mm~25mm approximately
Width: 700~2500mm approximately
Surface: Mill finished with bending angle, embossed, tread available
Aluminium Coil/Sheet 1000 Series
1000 series typical alloy: Aluminium Sheet 1100, 1050, 1060, Aluminium Coil 1060, 1050, 1100, 1200, 1235; etc
Temper: H12, H14, H16, H24, H18, O, H112
Size available (thickness): 0.2~4.0mm, (C. C)
4.0~6.0mm, (C. C or D. C) Over 6.0mm (D. C)
Width: Normally 700~2600mm
Aluminium Coil/Sheet 3000 Series
3000 series typical alloy: Aluminum Coil 3003, 3004, Aluminum Coil 3105, 3104, 3102 etc
Temper: H14/24, H16/26, H18, O, H111 etc
Size available (thickness): 0.2~6.0m normally
Width: Normally 700~2400mm normally
Aluminium Sheet/Coil (5000 Series)
5000 series typical alloy: Aluminium Sheet 5005, Aluminium Sheet 5052 5005, 5050, 5754, 5082, 5083, 5086 etc
Temper: F, O, H111, H112, H32, H34, H38, H12, H22, H24, H34 etc.
Thickness available: 0.2~6.0 according to different temper
Width: 700~2000mm available
Aluminium Plate for CTP Printing
CTP Aluminium Coil, Sheet, Plate, lithographic quality for offset printing, computer to printing.
Application: Offset Printing of computer publisher
Alloy 1050, 1052, 1060, 1070;
Temper H16, H18;Thickness(mm)0.145-0.50; normal, color, and CTP Plate
